MIMAKI CG-60SRIII Cutter Plotter 24inches

  • Wider Roll cutting format for professional use
  • Stunning value & highly competitive performance
  • 3 different cutting widths available (606/1070/1370 mm)
  • Up to 70 cm/s cutting speed
  • Fast and accurate contour cutting
  • Best-in-class cutting pressure of up to 500g
  • Half-cut function holds image in place after cutting for perfect stickers and decals
Category:
Description

Description

CG-SR III Series: Extreme Curve Cutting Speed

With a host of technical improvements over previous cutters, Mimaki’s new CG-SR III range of cutting plotters features a 60 cm wide desktop model up to a 137 cm wide professional production unit. All with the capability to cut to a wider range of substrates and applications at higher speeds that ever before. By delivering a practical and cost effective solution for every sign and graphics need, the highest possible return on your investment is assured.

Item

CG-60SRIII

CG-100SRIII

CG-130SRIII

Acceptable sheet width

90~740 mm

90~1,250 mm

90~1,550 mm

Effective cutting area

606 mm

1,070 mm

1.370 mm

Maximum speed

Cutting: 70 cm/s, Moving: 100 cm/s

Adjustable speed range

1 – 10 cm/s (1 cm/s step adjustment), 1 – 70 cm/s (5 cm/s step adjustment)

Mechanical resolution

X direction: 2.5 μmˎY direction: 5 μm

Command resolution

25 μm or 10μm (MGL-IIc) / 100 μm, 50 μm (MGL-Ic1)

Repeatability*1

± 0.2 mm / 2 M

Effective Repeatability*2

586 mm × 2 M

1,050 mm × 2M

1.350 mm × 2M

Maximum pressure

500g

Range ofdown pressure Cutter

10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 500g(10g step)

Pen

10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 150g(10 g step)

Acceptable sheet*2

Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet

Acceptable tool*3

Cutter, Ball-point pen

Type of command

MGL-IIC / MGL-Ic1

Interface

USB2.0ˎRS-232CˎEthernet

Receiver buffer size

27 MB Standard (When sorting, 17 MB)

Operational environment

5 – 35 ºC, 35 – 75 %(Rh), Non-condensation

Power requirement

AC 100 V – 240 V, 145 VA or less

Dimensions (W x D x H)

1,030 × 430 × 335 mm

(1,030 × 430 × 1,185 mm)*4

1,530 × 580 × 1,150 mm

1,830 × 580 × 1,150 mm

Weight

24kg

41kg

46kg

Stand

Optional equipment

Standard equipment

Standard equipment

MIMAKI CG-SRIII SERIES CUTTING PLOTTERS

CG SRIII SeriesThe Mimaki CG-SRIII Series of roll-based cutters are available in two widths. These models feature continuous crop mark detection for precise contour cutting. A proprietary half cut function leaves a small bit of backing sheet at connecting points for easier handling. Accurate long-length cutting is enabled through segment compensation. These cutting plotters are ideal for producing decals, stickers, cut-vinyl signs and more.


CG-SR III Series Go Beyond

  • Two sizes available:
    • CG-100FXII: 49.2 inches (1525 cm)
    • CG-130FXII: 61 inches (155 cm)
  • Continuous crop mark detection
  • Half cut function
  • Segment compensation
  • Over cut function
  • Three selectable job speeds
  • Media load from front or back
  • Remote event notification function
  • FineCut8 and SimpleCut software included

HIGHLIGHTS OF THE MIMAKI CG-SRIII SERIES

The Mimaki CG-SRIII Series roll-based cutting plotters include a number of features for producing a wide range of contour-cut pieces.

More application possibilities

A higher cutting pressure of 500g widens the range of materials for various applications. The clamp pressure can be adjusted to cover a wide range of sheets including thick materials. An optional sheet basket enables stable long-length cutting.


Mimaki register mark detection

Continuous crop mark detection

A higher cutting pressure of 500g widens the range of materials for various applications. The clamp pressure can be adjusted to cover a wide range of sheets including thick materials. An optional sheet basket enables stable long-length cutting.


Segment compensation

Intermediate crop marks in the feed direction enable four-point corrections for each segment. This leads to accurate, long-length cutting, even if the image is distorted.

Mimaki Segment correction function


Half cut mechanism

Mimaki Half cut technology

With the proprietary half cut function, the backing sheet can be cut leaving behind a small connecting point that can be easily detached when necessary. This enables easier handling when removing the contour cut piece from the sheet.


Mimaki_error_occurence

Event Notification function

Receive status messages through the email notification system for unattended operation.

WHAT YOU CAN DO WITH THE MIMAKI CG-SRIII SERIES

  • Stickers
  • Labels
  • Decals
  • Cut-vinyl signage
  • and more…

Suitable Cutting Materials

(Colored) Vinyl, transparent PET, (transfer) paper, flock, rubber.